ACCUPLACER
©
ACCUPLACER© Cut Scores |
| 60 | Arithmetic |
| 70 | Reading |
| One year post-secondary studies |
The First Qualified/First Admitted (FQFA) process is used for the majority of SIAST programs. When we determine that you meet the program's admission requirements, you will be offered admission based on the date you fully qualify for the program. The earlier you provide the appropriate documents and information that qualify you for admission to the next intake, the earlier you might begin your studies. Your application, once qualified, is always considered for the next intake.
Applicants to programs with multiple intakes in an academic year remain in the application pool until the last intake for that academic year has begun. Programs using the FQFA process receive applications year round and maintain an application pool for each academic year. Qualified applicants who are not offered a seat must reapply for the next academic year.
Sponsored programs or programs targeted to specific groups do not accept applications year round or maintain an application pool.
Please refer to the course descriptions for course specific learning methods.
SIAST recognizes that adults learn in many different ways and through many different means. This includes acquiring knowledge and skills through life and work experience or non-formal training.
Many SIAST students benefit from transferring credit. You may be eligible to transfer credit from or to another college or university. To learn more, visit our transfer credit web page.
You will receive instruction in basic job related interpersonal, oral and written communication, including writing for the workplace and job search techniques to develop employability skills.
1.0
Credit Units
16.0
Lecture hours
Learning Method(s):
Lecture/Theory
Equivalent Course(s): COMM 127 COMM 186 COMM 187 COMM 188
You will explore electrical theory and develop the practical skills needed to test electrical components and systems. You will also develop the skills needed to service batteries.
4.0
Credit Units
54.0
Other hours
Learning Method(s):
Lecture/Lab
You will be provided with an introduction to the basic operation of two-cycle and four-cycle engines with a focus on lubricants and spark plugs.
1.0
Credit Units
12.0
Other hours
Learning Method(s):
Lecture/Lab
You will study the theory of operation and learn how to service motorcycle and ATV carburetion and fuel systems.
2.0
Credit Units
30.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): MCYL 200
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will learn the theory of operation and the servicing procedures of motorcycle /ATV starting and charging systems. The course content includes servicing various electrical accessories. You will also learn the theory of operation of the ignition systems used on motorcycles and ATV’s, such as transistorized, and CDI ignitions. You will learn how to troubleshoot and adjust these systems.
4.0
Credit Units
60.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
Your studies will cover the common service procedures required by a motorcycle/ATV technician. You will learn to perform maintenance tasks, including lubrication servicing, valve adjustment, clutch service, cooling system servicing and tune-up.
3.0
Credit Units
48.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): MCYL 203
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
Your studies will focus on the practical skills required to service two-stroke engines. These skills include piston, crankshaft and transmission servicing.
2.0
Credit Units
30.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): MCYL 204
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will learn how to service and repair four-stroke motorcycle/ATV engines. Practical, hands-on skills will be emphasized. The course content includes a research project into the future trends in the motorcycle/ATV industry.
4.0
Credit Units
60.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): MCYL 205
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will explore the clutches and drive systems unique to ATV’s. You will study the theory of operation of belt drives, differentials, final drives and CV joints. You will also learn how to service clutches and drives.
2.0
Credit Units
24.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): MCYL 206
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will learn how to repair and service motorcycle/ATV wheels, tires, brakes, front suspension and final drives. The course content includes the theory and procedures you need to troubleshoot handling problems.
4.0
Credit Units
54.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): MCYL 207
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will learn how to use precision measuring tools in the metric and Imperial systems.
1.0
Credit Units
12.0
Other hours
Learning Method(s):
Lecture/Lab
Your studies will focus on servicing fuel pumps, recirculation systems and oil injection systems. You will study carburetion theory and learn how to service outboard carburetors. You will learn the theory behind today’s electronic fuel injection systems. You will also apply this knowledge by participating in a demonstration of software diagnostic techniques.
4.0
Credit Units
60.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will study outboard electrical systems, including the ignition, starting and charging of systems. You will explore the theory and troubleshooting techniques of a typical electronic engine management system.
3.0
Credit Units
48.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): MRNE 200
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will learn how to service the remote controls and steering systems used with outboard engines.
2.0
Credit Units
24.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
Your studies will focus on the theory of two-stroke outboard engines. You will learn the procedures involved in overhauling these engines.
3.0
Credit Units
50.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): MRNE 205
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will learn the theory of operation of four-stroke outboard engines and the practical application of service and tune-up procedures. You will also be given the opportunity to research future trends that impact the marine industry with regard to marketing and new technologies.
3.0
Credit Units
50.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): MRNE 206
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will study the theory of operation of outboard cooling systems, including water pumps, thermostats and water flow, and acquire the practical skills required to service these cooling systems. You will study the operation of the lower gear case used on outboard engines and learn how to service the gear sets, shifting mechanisms and pressure testing.
4.0
Credit Units
56.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will learn the techniques for rigging boats and setting-up and servicing trailers.
2.0
Credit Units
30.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): MRNE 210
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
Your studies will cover various aspects of employing safe work procedures in the shop area. You will learn how to access service information using manuals, CD ROMs and web based information. You will learn about the metric and Imperial fasteners used in the power equipment trade. You will develop the skills needed to remove broken fasteners, repair damaged threads and use soldering tools. You will also learn about bearings and seals.
1.0
Credit Units
18.0
Other hours
Learning Method(s):
Lecture/Lab
Your studies will focus on carburetor theory and the servicing of fuel delivery systems on snowmobiles. You will also learn how to diagnose fuel system malfunctions and service oil injection systems.
2.0
Credit Units
30.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): SNOW 200
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will learn about the electronic engine management systems used on current model snowmobiles, including the theory of operation and testing procedures of electronic fuel injection (EFI) systems. You will also learn about carburetor compensating systems.
1.0
Credit Units
18.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): SNOW 201
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
Your studies will focus on the repair of recoils and the servicing of snowmobile starting, charging and lighting systems. You will learn the theory of operation of various ignition systems used for snowmobile engines. You will also learn about the techniques and tools used to diagnose ignition malfunctions.
4.0
Credit Units
54.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will study snowmobile drive systems and learn how to recondition and align components.
2.0
Credit Units
30.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): SNOW 207
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
Your studies will focus on two-stroke engine overhauls, including pistons, rings, and crankshafts and diagnosing engine malfunctions. You will also study snowmobile cooling systems and learn how to service these systems.
4.0
Credit Units
66.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will learn the theory of operation and the servicing of snowmobile four-stroke engines. You will also be provided with the opportunity to research future trends in the snowmobile industry.
2.0
Credit Units
24.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): SNOW 205
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will learn how to service chain cases, brakes and track and rear suspensions.
3.0
Credit Units
42.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): SNOW 208
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
You will learn how to service snowmobile front steering and suspension systems, including the procedures for recharging gas shock absorbers.
2.0
Credit Units
30.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s): SNOW 209
Prerequisites:
ELEC 119 Minimum Grade of 60
and ENGN 113 Minimum Grade of 60
and SFTY 119 Minimum Grade of 60
