DRFT 104 Sketching
You will receive an introduction to the techniques and standards required to communicate graphically. The course content includes sketching of orthographic and isometric views, geometric constructions, sectional views, lettering, dimensioning and scaling as part of the drafting component.
2.0
Credit Units
30.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s):
DRFT 124
DRFT 105 Drafting AutoCAD
You will receive an introduction to the techniques and standards required to communicate graphically. The course content includes the AutoCAD user interface, view control, 2D geometric construction and drawing aids, layers, blocks, text, paper space, model space and plotting.
4.0
Credit Units
66.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
DRFT 104 Minimum Grade of 60
MAT_ 120 Mathematics for Construction Engineering Technologies
You will gain a basic background in trigonometry and algebra that is needed to do problem solving in applied areas and to advance to a study of calculus. You will study measurement, computations, algebraic operations, simplifications and solutions, trigonometry, graphing, exponents and logarithms. This course is intended to meet your needs in the construction stream of engineering technologies.
6.0
Credit Units
96.0
Lecture hours
Learning Method(s):
Lecture/Theory, Prior Learning, Online/Blackboard
Equivalent Course(s):
MAT 100
MAT 121
PHYS 102 Applied Physics
Your studies will focus on the basic physics principles of vectors, Newton's three laws of motion, work, energy, power, impulse and momentum, temperature, heat, fluid mechanics and DC circuits.
4.0
Credit Units
64.0
Lecture hours
Learning Method(s):
Lecture/Theory
Equivalent Course(s):
MECA 121
SEM_ 101 Technology Seminars
You will receive an orientation to your program and learn where and how the technician/technologist fits into the workplace and society. You will become familiar with the role of technicians/technologists in society, study and time management skills, increasing diversity in the workplace, principles of sustainability, the impact of technology on society and workplace safety requirements.
1.0
Credit Units
16.0
Lecture hours
Learning Method(s):
Lecture/Theory, Prior Learning
Equivalent Course(s):
ENGM 181
ETHC 183
ORTN 120
SRVY 120 Surveying 1
You will receive an introduction to the basics of surveying. The course content includes horizontal measurements, levelling, angle and direction measurement, computations, traverses and drafting plans.
5.0
Credit Units
80.0
Other hours
Learning Method(s):
Lecture/Lab, Independent Study, Prior Learning
TCOM 102 Communication in Technology
Your studies will focus on the basic skills required of the technologist in the workplace. You will examine the communication process and interpersonal and workplace communication techniques. The course content includes technical writing and job search skills.
3.0
Credit Units
48.0
Lecture hours
Learning Method(s):
Lecture/Theory, Learn Linc, Prior Learning, Online/Blackboard
Equivalent Course(s):
JOBS 288
JOBS 290
TCOM 120
TMGT 180
TERR 121 Terrain Evaluation
The course provides an introduction to physical geology beginning with the study of the origin, composition and characteristics of the major minerals and rock classifications. You will also study geologic processes and the landforms and geologic structures created by these processes. Labs will provide you opportunities to focus on map reading and interpreting air photos. Saskatchewan's glaciated terrain will be emphasized.
5.0
Credit Units
80.0
Other hours
Learning Method(s):
Lecture/Lab
CAMP 225 Survey Camp
Using the knowledge gained in previous surveying and AutoCAD courses, you will participate in surveying exercises and perform two projects in the field. In the first project, you will use the data collected in the field to produce a topographic map of one area. In the second project, you will document, design and layout a section of roadway including a horizontal curve. You will be introduced to the application of GPS survey equipment.
6.0
Credit Units
90.0
Lab hours
Learning Method(s):
Lab/Practical
Equivalent Course(s):
CAMP 224
Prerequisites:
SRVY 222 (concurrent)
and COAP 108 (concurrent)
COAP 108 Computer Applications
You will become familiar with and use standard drafting practices and symbols to produce typical civil engineering drawings using AutoCAD. You will also become familiar with the basic concepts and applications of civil design software.
3.0
Credit Units
52.0
Other hours
Learning Method(s):
Lecture/Lab
Corequisites:
SRVY 222
Prerequisites:
DRFT 105 Minimum Grade of 60
CONC 120 Concrete Technology
You will be introduced to the practical and theoretical aspects of concrete technology. Building on the skills developed in the classroom and lab, you will perform current CSA test procedures on plastic and hardened concrete, and fine and coarse aggregates.
3.0
Credit Units
52.0
Other hours
Learning Method(s):
Lecture/Lab, Prior Learning
MAT_ 246 Analytic Geometry and Calculus
The course covers the basic elements of differential and integral calculus of algebraic functions. With few exceptions, graphical and numerical methods (instead of rigorous proof) will be used to help you gain an understanding of the concepts and operations of technical calculus. The course content includes relevant engineering applications.
5.0
Credit Units
78.0
Lecture hours
Learning Method(s):
Lecture/Theory, Prior Learning, Correspondence, Online/Blackboard
Equivalent Course(s):
MAT 220
Prerequisites:
MAT 120 Minimum Grade of 60
MEAS 106 Analytical Measurements
You will gain an understanding of environmental measurements, sampling protocol and quality control of measurements and data. Your studies will focus on proper sampling protocol as it applies to field and laboratory techniques of measurements.
3.0
Credit Units
39.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s):
ENVR 120
SOIL 120 Soil Analysis
Your studies will focus on data collection, analysis and reports for the identification, classification and determination of properties of earth materials. You will perform industry-standard test procedures on soil and aggregate. You will evaluate the methods and determine the results.
3.0
Credit Units
52.0
Other hours
Learning Method(s):
Lecture/Lab, Prior Learning
Prerequisites:
TERR 121 Minimum Grade of 60
SRVY 222 Surveying
Building on the skills developed in SRVY 120 (Surveying 1), you will focus on topographic surveys using Total Stations with data collection. You will be introduced to survey drawings and maps, contours, profiles and cross sections, calculating construction volumes, and calculating horizontal and vertical curves. You will also be introduced to survey control using local grids, UTM and the Western Canada Land Survey System.
4.0
Credit Units
65.0
Other hours
Learning Method(s):
Lecture/Lab, Prior Learning
Prerequisites:
SRVY 120 Minimum Grade of 60
and MAT 120 Minimum Grade of 60
TCOM 103 Workplace Communication
Building on the skills you developed in TCOM 102 (Communication in Technology), you will apply basic research skills to create workplace documents. Your studies will focus on the workplace skills of creating effective client relations, conducting meetings and giving presentations.
3.0
Credit Units
48.0
Lecture hours
Learning Method(s):
Lecture/Theory, Online/Blackboard
Equivalent Course(s):
COMM 181
COMM 190
TCOM 123
TCOM 190
Prerequisites:
TCOM 102 Minimum Grade of 60
ENVR 233 Environmental Monitoring
You will receive an introduction to measuring and monitoring environmental pollutants. Ambient air, indoor air and noise will be emphasized. You will receive practical hands-on experience in the lab using standard methods and procedures to record, operate and maintain equipment to sample, test and monitor ambient conditions and pollutants. You will analyze data for compliance to environmental regulatory acts, regulations, standards, policies and guidelines. You will also assess the proper air pollution control equipment for industrial processes.
3.0
Credit Units
48.0
Other hours
Learning Method(s):
Lecture/Lab
Corequisites:
HYDM 221
Prerequisites:
MEAS 106 Minimum Grade of 60
and COAP 108 Minimum Grade of 60
and PHYS 102 Minimum Grade of 60
ENVR 234 Environmental Ecology 1
Your studies will focus on energy flow and productivity, nutrient cycles, limnology, population growth and human ecology.
2.0
Credit Units
32.0
Lecture hours
Learning Method(s):
Lecture/Theory
HYDM 221 Hydrometeorology
You will learn the basics of hydrometeorology with a focus on the atmospheric portion of the hydrological cycle. The course content includes humidity, precipitation, wind, air mass movement, climate, interception and infiltration.
2.0
Credit Units
32.0
Lecture hours
Learning Method(s):
Lecture/Theory
Prerequisites:
MAT 120 Minimum Grade of 60
and PHYS 102 Minimum Grade of 60
HYDO 225 Groundwater Technology
You will discuss the principles of groundwater, drilling, design and construction. You will also discuss the maintenance requirements of wells, groundwater protection and groundwater law.
6.0
Credit Units
96.0
Lecture hours
Learning Method(s):
Lecture/Theory
Prerequisites:
SOIL 120 Minimum Grade of 60
and MAT 246 Minimum Grade of 60
HYDR 220 Hydraulics
You will receive an introduction to the application of basic fluid mechanics principles (including pressure measurement, forces on submerged planes, buoyancy and stability, general energy equation and viscosity) and the fundamentals of hydrodynamics (including hydraulics of flow in pipes, flow measurement devices and pumping system design).
6.0
Credit Units
96.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
MAT 246 Minimum Grade of 60
and PHYS 102 Minimum Grade of 60
LABS 220 Water/Wastewater Lab Analysis
Your studies will focus on the lab skills required to obtain water and wastewater quality measurements. You will gain an understanding of what is involved in obtaining analytical results and comparing those results to the regulations.
4.0
Credit Units
60.0
Lab hours
Learning Method(s):
Lab/Practical
Corequisites:
WTER 230
Prerequisites:
MAT 120 Minimum Grade of 60
STAT 201 Statistics for Construction Engineering Technologies
Your studies will focus on the concepts and computations of statistics within the technical world in this technology statistics course. Statistical thinking and communicating will be emphasized. You will use mathematical methods and notations to gain a general understanding of statistical terminology, skills and methods. The course consists of three basic and building parts - an introduction to descriptive statistics (by organization and presentation techniques using tables and graphs), probability theory (presented as the link between descriptive and inferential statistics) and inferential statistics (by way of technical and business applications based on simple random sampling, confidence intervals, hypotheses testing and regression-correlation analysis).
3.0
Credit Units
48.0
Lecture hours
Learning Method(s):
Lecture/Theory
Prerequisites:
MAT 120 Minimum Grade of 60
WTER 230 Water Chemistry 1
You will study the general principles of chemistry and chemical calculations. Stoichiometry, concentration determination, equilibrium, acid-base chemistry, pH, volumetric and gravimetric analysis, and interpreting quantitative results with regard to accepted standards will be emphasized.
5.0
Credit Units
68.0
Lecture hours
Learning Method(s):
Lecture/Theory
Corequisites:
LABS 220
Prerequisites:
MAT 120 Minimum Grade of 60
and MEAS 106 Minimum Grade of 60
ENVR 231 Environmental Control
The course provides an introduction to various industrial processes and manufacturing that may cause pollutants as a by-product. You will learn how to identify, describe and apply design criteria and calculations to the selection of pollution control techniques and abatement equipment. Using dispersion modelling for air, water, groundwater and ground permeation, you will conduct the prediction of pollution.
5.0
Credit Units
80.0
Other hours
Learning Method(s):
Lecture/Lab
Corequisites:
ENVR 236
WTER 226
Prerequisites:
MAT 246 Minimum Grade of 60
and HYDO 225 Minimum Grade of 60
ENVR 235 Environmental Ecology 2
Your studies will focus on energy flow and productivity, nutrient cycles, limnology, population growth and human ecology.
5.0
Credit Units
70.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
ENVR 234 Minimum Grade of 60
ENVR 236 Environmental Monitoring 2
You will study the requirements of environmental legislation and standards as they pertain to the environmental monitoring of land/soil and water. You will learn about the sampling and analytical work related to environmental activities that affect land/soil and water. Field lab activities using sampling equipment and analytical test instruments will be emphasized. You will also learn about the potential impacts of the substances monitored on the environment and human health.
5.0
Credit Units
70.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
ENVR 233 Minimum Grade of 60
HYDR 221 Hydraulics
Building on the knowledge gained in HYDR 220 (Hydraulics), you will continue your study of flow in pipe networks (including friction and minor head losses). You will examine open channel flow, pump selection and flow measurement techniques. The course content includes practical laboratory experiments and writing laboratory reports.
3.0
Credit Units
50.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
HYDR 220 Minimum Grade of 60
MGMT 225 Technical Management
The course provides an introduction to various aspects of Canadian business in technical areas. You will calculate and evaluate project economies. You will also study the advantages, disadvantages and philosophy of various business ownerships (including sole proprietorships, partnerships, corporations and cooperatives), business organizations, management theories, production, inventory, quality control, marketing and promotion, personnel management and supervision.
3.0
Credit Units
40.0
Lecture hours
Learning Method(s):
Lecture/Theory
Prerequisites:
MAT 120 Minimum Grade of 60
WTER 226 Water Chemistry
You will study the general principles of organic chemistry and the importance of microbiology as they apply to water and wastewater treatment and analysis. You will apply these theories to laboratory analysis, with an emphasis on interpreting the laboratory results.
3.0
Credit Units
50.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
WTER 230 Minimum Grade of 60
and LABS 220 Minimum Grade of 60
ENVR 226 Site Assessment and Remediation
You will acquire the knowledge needed to plan, design, organize and implement an Environmental Site Assessment (ESA). During the first phase, you will collect current and historical site background information and identify potential environmental concerns. During the second phase, you will sample, test, monitor, identify, and locate the contaminants. During the third phase, you will evaluate the risk assessment and select the proper site remediation technology.
6.0
Credit Units
96.0
Other hours
Learning Method(s):
Lecture/Lab
Corequisites:
ENVR 236
Prerequisites:
HYDO 225 Minimum Grade of 60
ENVR 227 Waste Management
The course content includes the methods of classification, handling, transportation and disposal of municipal, biomedical and dangerous waste material. You will study pollution prevention models and techniques, constraint mapping, landfill site selection and landfill design layout. Your fieldwork will include developing waste minimization and waste characterization plans.
6.0
Credit Units
96.0
Other hours
Learning Method(s):
Lecture/Lab
Prerequisites:
ENVR 235 Minimum Grade of 60
and ENVR 231 Minimum Grade of 60
and HYDO 225 Minimum Grade of 60
ENVR 228 Environmental Management
You will learn how to apply environmental management systems using the International Organization for Standardization (ISO 14000 series). You will study environmental liability, accountability and due diligence in terms of risk assessment and risk management, Occupational Health and Safety, and emergency response planning.
5.0
Credit Units
82.0
Other hours
Learning Method(s):
Lecture/Lab
Corequisites:
ENVR 226
ENVR 227
ENVR 229
Prerequisites:
ENVR 235 Minimum Grade of 60
and ENVR 231 Minimum Grade of 60
ENVR 229 Environmental Impact
Your studies will focus on the environmental impacts (EI) associated with engineering works and proper environmental management to avoid or minimize EI through mitigation measures. You will receive background information about the environmental impact assessment (EIA) processes, environmental assessment legislation and EIA preparation. You will review the steps and procedures for applying and obtaining environmental approvals from regulatory agencies. The effects of development on the water, land and atmosphere, and the cultural and socioeconomic impacts on society will be emphasized. You will discuss the implementation of change and public education. You will also use the knowledge acquired in previous environmental courses to create a proposed environmental project utilizing the EIA process.
5.0
Credit Units
80.0
Other hours
Learning Method(s):
Lecture/Lab
Corequisites:
ENVR 227
Prerequisites:
ENVR 231 Minimum Grade of 60
and ENVR 235 Minimum Grade of 60
and ENVR 236 Minimum Grade of 60
INST 233 Instrumentation and Data Acquisition
You will study advanced measurement techniques (including data transmission techniques, computer interfacing and control), that are utilized in the monitoring and control fields of the engineering technologies. You will participate in labs that emphasize the use of computers and advanced instrumentation in the collection, transmission and processing of data.
2.0
Credit Units
30.0
Other hours
Learning Method(s):
Lecture/Lab
Equivalent Course(s):
INST 235
MGMT 226 Project Management
You will study the project management process, construction contracts, specifications, inspection and the legal implications of engineering work.
4.0
Credit Units
64.0
Lecture hours
Learning Method(s):
Lecture/Theory
Prerequisites:
MGMT 225 Minimum Grade of 60
TCOM 104 Applied Research in Technology
You will develop a technical proposal and apply advanced research skills to a technical problem. You will use the technical problem-solving process in an applied research project and present your research findings in a written report and oral presentation.
2.0
Credit Units
34.0
Lecture hours
Learning Method(s):
Lecture/Theory
Equivalent Course(s):
COMM 115
COMM 182
COMM 290
Prerequisites:
TCOM 103 Minimum Grade of 60
Year 1
Semester 1 - September to December
Semester 2 - January to April
Work Term - May to December
Year 2
Semester 3 - January to April
Semester 4 - May to July
Year 3
Semester 5 - September to December
